2MP IP Door & Bulkhead Camera | Flush-Mount HD Camera

Q: Does it support PoE and/or 12 V DC input?

Yes — this model supports PoE (IEEE 802.3af) and optionally 12 V DC (~130 mA max) for flexibility in installation.

Q: What is the maximum storage capacity for edge-recording?

It supports a built-in microSD/SDHC card slot supporting up to 128 GB (depending on firmware and region).

Q: What mounting style is used?

The camera uses a door or bulkhead style flush or semi-recessed mount, designed for panel or door-frame installations rather than external surveillance housings.

Q: Will it integrate with my existing VMS/NVR?

Yes. It supports ONVIF Profile S and offers multi-stream video, making it compatible with most network video recorders and VMS platforms.

Q: Is this camera suited for harsh environments like aircraft or marine?

Yes — while the standard version is rated to –20 °C to +50 °C non-condensing, consult us for higher-temperature, vibration or marine-grade variants.

Key Features

1/2.8" SONY STARVIS CMOS Sensor

5MP Fisheye Lens (190° Wide View Angle)

DC12V/Waterproof POE Cable

Compact IP66 Weatherproof Housing

Video output - 30fps @ 1920x1080

Up to 128GB microSD Local Storage

H.264 and MJPEG, Real WDR

Contact Us About This Product

Overview

The 2MP IP Door/Bulkhead Camera delivers reliable Full HD performance in a compact outdoor-ready housing. Powered by a SONY STARVIS CMOS sensor, this camera captures crisp 1080p video with excellent low-light sensitivity, making it an ideal choice for day and night surveillance. With support for PoE, weatherproof IP66 protection, and flexible fixed lens options, it provides a cost-effective solution for businesses and security installations that demand clear video quality and dependable operation.

Advanced imaging features such as WDR, 3DNR, and motion detection help ensure sharp, accurate footage in challenging environments. Built-in microSD support allows for convenient local storage up to 128GB, while multiple streaming options and ONVIF compliance make integration with existing systems straightforward.

1.3 Megapixel 1/3.2” CMOS Sony Starvis IMX017 image sensor SoC System on a Chip
Eyenix DSP(ISP) Digital Signal Processor
High Resolution, 1000 TVL CVBS (1080p30/p60 HDSDI optional)
Waterproof housing to protect electronics & optics
Lightweight, entire assembly is under 1lb
Materials used to withstand Saltwater environment
Fog Proof Lens Cavity – nitrogen purged
Camera continuous operation, -40°C to +55°C (qualified IAW customer requirements. Capable of -40°C to +85°C operation)
Factory order option for Sikorsky S92. Install without modification to existing camera mount.
Use for hoist and lift camera, SAR, Flight Testing, cockpit and passenger compartment monitoring, cargo hold remote viewing
Wide operating range
Specifically designed as an aviation / helicopter camera
Tested and qualified to RTCA DO-160G commercial aviation requirements. Reports are available upon request.
Camera housing mates to the Sikorsky S92 existing mounting bracket. No modifications required.
Connector Index Keyway facing forward (FWD) at 12:00 o’clock position when the camera is installed on the aircraft.
Camera is oriented on the aircraft with 56⁰ FOV along longitudinal axis (Front/Aft) and 72⁰ along the lateral axis (Left/Right).
Camera 3-pin connector (Signal, Power, and Ground) D38999/21NA98PN mates to existing wiring harness without a need for modifications. KPT02E-3PA 206 connector option is available.
Aircraft grounding with the outer shell of the camera connector.
True “Plug and Play” replacement of previous generation cameras while maintaining existing mounts and mounting locations.

Specification	Value
Image Sensor	1/2.8″ Sony STARVIS CMOS, ~2.13 MP
Maximum Resolution	1920 × 1080 (1080p Full HD)
Minimum Illumination	0.05 lux (Color), 0.005 lux (Sens-up mode)
Lens Type	Fixed board lens (model dependent)
Network Interface	RJ-45 10/100 Base-T (PoE supported)
Video Streams	Triple-stream (independent frame rate/bit rate)
ONVIF	Profile S (for VMS/NVR compatibility)
Edge Storage	microSD/SDHC slot (up to 128 GB)-built-in
Power Input	PoE (IEEE 802.3af) or 12 V DC (max ~130 mA)
Operating Temperature	-20 °C to +50 °C (non-condensing)
Mount Style	Panel flush / bulkhead mount housing

Why Choose This Camera

Discreet yet full-HD performance: Flushed mounting, low-profile design, yet no compromise on resolution—ideal for door frames, bulkheads, cabin panels, unmanned vehicles and compact spaces.
Seamless network integration: Supports PoE and ONVIF Profile S for fast installation and compatibility with your existing IP-video systems or mission networks.
Robust edge capabilities: With built-in micro-SD storage and triple-stream video support, it can handle local fallback recording and efficient network bandwidth use.
Optimized for low-light and variable lighting: With Sony STARVIS sensor and advanced image processing (Sens-Up mode) the camera captures usable detail even in challenging light conditions.
Mounts where others struggle: Bulkhead/panel design means it can replace or retrofit in consoles, door surrounds, HVAC-cuts, UAV fuselages, or vehicle cabins without bulky external housings.